Giỏ hàng của bạn trống!
0 sản phẩm
Desoldering in an instant, with reduced solder residue! Combines desoldering gun and temperature-controlled soldering iron in one unit.
Two-stage trigger switch (PAT.P)
Pulling the trigger (lightly) activates the first stage switch. The pump starts, and the air pressure decreases in the vacuum chamber.
Next, pulling the trigger fully activates the second stage. The open-valve will open, and the solder is sucked up at once by the negative pressure in the vacuum chamber.
With open-valve mechanism
A wide range for terminals, connectors and flat ICs
To keep the temperature constant during desoldering
Reduces noise during heater ON/OFF
Makes changing the filter easy
Desoldering/Soldering time is approx. 2 seconds / 5×5mm land (with PX-2RT-B tip, TP-100N-10 nozzle)
The open-valve allows the device to reach vacuum pressure of -0.06MP (approx.-450mmHg) in only 0.1second. (about 4 times faster than our SVS-500AS).
The arrow indicates solder residue.
Soldering Iron Unit SVS-800AS, SVS-580AS, SVS-500AS
|Công suất||110V,120-130V (200W), 220-240V (270-300W)|
|Voltage||110V,120-130V,220-240V AC 50/60Hz|
|Nhiệt độ cài đặt||Deoldering Unit 250−450˚C, Soldering Unit 200−480˚C|
|Accessories||Cleaning pin TP-100CP-13, Soldering iron stand ST-76|