0 sản phẩm
0đ
Trạm hàn đa năng tích hợp máy hàn, máy hút thiếc GOOT SVS-800AS
- Thương hiệu: GOOT
- Mã sản phẩm: GOOT-AUTOMATIC SOLDER
- Tình trạng: 2-3 Ngày
Liên hệ
Giá sau Thuế: Liên hệ
Omnifunctional machine for soldering, desoldering and reworking.
SERVICE STATION
REWORK UNIT
The temperature can be set to max 550°C.
SOLDERING UNIT
Good for a wide range of soldering work with 70W heater.
DESOLDERING UNIT
Instant desoldering with open-valve mechanism.(Please refer to the next page.)
INDIVIDUAL POWER SWITCHES
Along with the main power switch, there are switches for soldering, desoldering, and reworking.
Independent Pumps
Desoldering and reworking operate simultaneously
400% More Suction Capacity
With open-valve mechanism
Ceramic Heater with Internal Sensor
A wide range for terminals, connectors and flat ICs (soldering & desoldering)
Superior Temperature-Control Circuit
To keep the temperature constant during desoldering
Zero Volt Switch Circuit
Reduces noise during heater ON/OFF
OPEN-VALVE MECHANISM
Two-stage trigger switch (PAT.P)
Step 1
Pulling the trigger (lightly) activates the first stage switch. The pump starts, and the air pressure decreases in the vacuum chamber.
Step 2
Next, pulling the trigger fully activates the second stage. The open-valve will open, and the solder is sucked up at once by the negative pressure in the vacuum chamber.
Replaceable Cartridge Filter
Makes changing the filter easy
TIP/NOZZLE TEMPERATURE-RECOVERY FEATURES
Desoldering/Soldering time is approx. 2 seconds / 5×5mm land (with PX-2RT-B tip, TP-100N-10 nozzle)
Vacuum pressure compared with other goot models
The open-valve allows the device to reach vacuum pressure of -0.06MP (approx.-450mmHg) in only 0.1second. (about 4 times faster than our SVS-500AS).
SUCTION CAPACITY COMPARISON
The arrow indicates solder residue.
Soldering Iron Unit SVS-800AS, SVS-580AS, SVS-500AS
Soldering Iron Unit SVS-800AS, SVS-580AS, SVS-500ASs
| SPECIFICATIONS | |
| Công suất | 670-760W |
| Voltage | 220-240V AC 50/60Hz |
| Nhiệt độ cài đặt | Desoldering Unit 250−450°C, Soldering Unit 200−480°C Rework 150-550℃ |
| Accessories | Cleaning pin TP-100CP-13 / Soldering iron stand ST-76 |
